Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between conventional liquid paint and powder coating is that, powder coating does not require solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electro statically and is then cured under heat to allow it to flow and form a "skin."  It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals such as “white ware”, aluminum extrusions, and automobiles.

• Powder coating emit zero or near zero volatile organic compounds (VOC).

• Powder coating can produce much thicker coatings than conventional liquid coatings without running or sagging.
• Powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating.
• Powder coating production lines produce less hazardous waste than conventional liquid coatings.
• Capital equipment and operating costs for a powder line are generally less than for conventional liquid lines.
• Powder coated items generally have fewer appearance differences between horizontally coated surfaces and vertically coated surfaces than liquid coated items.

Automatic Plant, equipped with the latest Powder Coating Instruments from GEMA, and advanced Multi stage Pre-treatment systems (Conversion Coating – on Steel and Aluminium)

With a job size to Powder Coat 2850mm height products on Conveyor Line with Six Automatic Guns installed on “GEMA’s Reciprocators.

With Production Capacity to Powder Coat 10 tons of material daily.

Overseas Distribution Services Inc., is accredited with ISO 9001 : 2000 certification from International Industrial Certification

Overseas Distribution Services Inc. follows ASTM and ISO Standards for powder coating processes and is an approved powder coater for

• Alwan Powder Coating, also known as Gulf Powder Polyester and Epoxy Coating Factory based in Saudi Arabia, and
• Plascoat, manufacturer of PP powders.